Copper Sheet 0 3/16in Panels Cu 99% Metal Cut Selectable Pure 3 15/16in-78 3/

Description

Copper sheet 5mm plates Cu 99% sheet metal cutting selectable pure 100mm-2000mm
Copper sheet 5mm plates Cu 99% sheet metal cutting selectable pure 100mm-2000mm
For the width and length of a sheet metal blank, the tolerance is +/- 2mm
The surface is raw, so scratches are normal. Item photo is just a general example
TOP quality at fair prices
High-quality products made to measure and cut to size
Competent advice & service
Technical specifications:
Brand:
Evek
Manufacturer number:
Not applicable
Type:
sheet
Material:
copper
Operation area:
Electrical engineering and electronics; Heat exchanger; Connection terminals; Cables and wires; Windings of all kinds; Electrodes
Standard classifications:
Material number:
2.0065
US:
CW004A
EN:
Cu-ETP
Additional Information:
Density:
8.93 g / cm³
Melting point:
1083 ° C
Thermal conductivity:
394 W / m K
Electr. Resistance:
0.018 Ω mm² / m
Electr. Conductivity:
57 m / Ω ​​• mm²
Description:
Sheet copper with the material number 2.0065 is tough-polarized copper. It is made by electrolytic refining and is made up of about 99.9% copper and about 0.04% oxygen. Cu-ETP is characterized by a very high thermal and electrical conductivity. Copper sheet cutting is well resistant in a natural atmosphere as well as against neutral salt solutions and non-oxidizing acids. The material is easy to weld, but difficult to braze or solder. It also has medium hot formability and poor cold formability. The material is difficult to polish mechanically and electrolytically and it is difficult to galvanize. 2.0065 has excellent machinability.
Since copper has a high sheet 2.0065 conductive properties, it is Allen above used in the fields where high electrical conductivity is required, such as in electrical engineering and electronics. The other most important areas of application of Cu-ETP are:
Heat exchanger;
Connection terminals;
Cables and wires;
Windings of all kinds;
Electrodes.
Copper sheet is characterized by the following properties:
very high conductivity for heat and electricity;
good resistance in a natural atmosphere;
not susceptible to neutral salt solutions and non-oxidizing acids;
easy to weld;
excellent machinability;
poorly hard- and soft-solderable;
medium hot formable and poor cold formable;
difficult to polish mechanically and electrolytically; difficult to electroplate.
documentation
Datasheet (German)
Listing and template services provided by inkFrog
Sheet copper with the material number 2.0065 is tough-polarized copper. It is made by electrolytic refining and is made up of about 99.9% copper and about 0.04% oxygen. Cu-ETP is characterized by a very high thermal and electrical conductivity. Copper sheet cutting is well resistant in a natural atmosphere as well as against neutral salt solutions and non-oxidizing acids. The material is easy to weld, but difficult to braze or solder. It also has medium hot formability and poor cold formability. The material is difficult to polish mechanically and electrolytically and it is difficult to galvanize. 2.0065 has excellent machinability. Since copper has a high sheet 2.0065 conductive properties, it is Allen above used in the fields where high electrical conductivity is required, such as in ele