Creality Glass Bed 320X310mm For CR-10 V2 / CR-10S Pro 3D Printer US Stock

Description

Store category
Sign Up Now !
You may also like
Creality Glass Bed 320X310mm For CR-10 V2 / CR-10S Pro 3D Printer US Stock
Product Description
Note : Only fit for Creality CR-10S Pro, CR-10S Pro V2, CR-10 V2 and CR-X the 4 models
Product Characteristics
1.Leveling: Use A4 paper to adjust to the platform and the nozzle till there is obvious hindrance, but to be able to pull.
2.Oily Clean: Severe oil on the surface of the platform will affect adhesion,if this happened, please heat the bed to 90℃, or put the printer aways for 8 hours, but the most direct way is to wipe a little with alcohol.
3.This product acid and alkali resistant, high temperature resistance 400℃.
4.The first layer of the product has a hardness of 0.5H, which is easier to be scratched, but the scratching does not affect the adhesion of the models.
5.This product will change color when rubbed repeatedly with alcohol, but will not affect normal use.
6.This product will enhance the viscosity and absorb oil ability of the platform after being slightly wiped with alcohol.
7.Try to avoid repeated touches on the platform by hand to prevent serious sweat from touching the platform.
8.This product is processed with a special process and will never appear in the glass, good solution to the problem of platform unevenness.
Temperature settings for different filaments:
PLA:50-70ºC
Flexible filament: 50-70ºC
ABS:100-125ºC (110ºCis recommended)
PC:100-130ºC (120ºC is recommended)
Nelon:90-120ºC (110ºC is recommended)
PP:100-130ºC (120 ºC is recommended)
PETG: 50-70ºC
Specification:
Material:Special Glass + microporous coatings
Item size:320*310*3mm
Box size: 360*350*40mm
Payment
Shipping
Returns
About us
Contact us
Payment
We only accept Paypal.
Shipping
Shipping from US with tracking number.
Returns
30 day returns Guaranteed.
About us
We only sell Genuine Creality 3D Printer with Brand logo and model on any component.
Contact us
If you have any problems and suggestion about our products and service,please feel free to contact us at any time through eBay messages,we can help you out by all means.
Feedback
Note : Only fit for Creality CR-10S Pro, CR-10S Pro V2, CR-10 V2 and CR-X the 4 models Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models. Temperature settings for different filaments: PLA:50-70ºC Flexible filament: 50-70ºC ABS:100-125ºC (110ºCis recommended) PC:100-130ºC (120ºC is recommended) Nelon:90-120ºC (110ºC is recommended) PP:100-130ºC (120 ºC is recommended) PETG: 50-70ºC