Tekin T-130 High Speed Programmable Servo, 1:10th scale TEKTT1502

Description

Tekin T-130 High Speed Standard Servo, 1:10th scale
TEKTT1502
Command every turn and pass the competition with confidence using this T-130 Servo. Designed to give you the industry’s highest per degree resolution steering and plenty of speed to keep that chassis where you want it. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you in control. Fine-tune your setup with an extensive set of adjustments via Tekin’s HotWire PC Interface.
FEATURES:
Specifically Designed for 1/12 and 1/10 Scale Applications
Included Aluminum Vector Servo Arm
Full Aluminum Servo Housing
Element Proof Design
LP = Low Profile Design
Precision Cut Full Metal Gears
ABEC5 Ball Bearings
Digital Magnetic Position Encoder
High Voltage Capable
High Torque Coreless Motor
25T Output Spline
Programmable via HotWire PC Interface
Overload Protection Technology
Thermal Protection Circuitry
Low Voltage Alarm
Quiet, Efficient, Cool Operation
HDAC: High Density Copper PCB's
Digital Magnetic Position Encoder
Our servos use Digital Magnetic Position Encoding rather than a standard potentiometer, which gives Tekin servos the industry leading accuracy, linearity and consistency.
Accuracy
Precise linear movement through the entire motion range with less than .2 degrees of deviation from start point to end point make Tekin the superior performance product. Low deviation translates to pinpoint accuracy not found in other servos, which tend to wander and center poorly. Tekin is built to last at peak performance.
Linearity
Potentiometer servos can be up to seven degrees non-linear from end point to end point, creating a disconnected feel from your transmitter. Tekin servos eliminate this disconnect, giving you a linear feel and more precise control over your servo movement and position.
Repeatability
Performance is important but we are all about consistent performance. Potentiometer performance drifts due to many variables; heat, age, component quality, etc. Magnetic Encoding is a rock-solid, repeatable and consistent technology bringing an unmatched consistency to Tekin servos. Tired of constantly trimming your servo and having response feel different during times of longer usage? Tekin servos are the answer.
Efficiency
Accuracy drives efficiency. A servo that has to work less to center or stop without overshooting position is using less energy. This means less heat build-up, less component fatigue and longer life.
Element Proof
Dependable, no matter the terrain. Element Proof Tekin products are designed to handle water, mud & snow within reasonable restrictions. While we are not afraid to take on the elements, submerging is not recommended and voids the warranty.
SPECS:
Torque:
8.4 - 7.4 - 6.0V
148 - 136 - 120 oz/in
10.7 - 9.8 - 8.7 kg/cm
Dynamic Torque:
8.4 - 7.4 - 6.0V
220 - 190 - 160 oz/in
15.8 - 13.7 - 11.5 kg/cm
Speed:
8.4 - 7.4 - 6.0V
0.03 - 0.04 - 0.05sec/60°
Input Voltage:
4.8V-8.4V
Gear Set:
Full Metal
Dimensions:
1.57 x 0.79 x 1.57in / 40 x 20 x 40mm
Mounting Height (Base to Mount Tabs):
1.10in / 28.4mm
Weight:
2.53oz / 72g