-40%
Voron 2.4 3d printer full kit with Hiwin rails LDO motors Raspberry Delta fan
Voron 2.4 3d printer full kit with Hiwin rails LDO motors Raspberry Delta fan

Voron 2.4 3d printer full kit with Hiwin rails LDO motors Raspberry Delta fan

$ 612.47

Availability: 100 in stock
  • Item must be returned within: 30 Days
  • Type: Extruder Upgrade Kit
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Condition: New
  • All returns accepted: Returns Accepted
  • Brand: Unbranded

    Description

    Thank Voron team for bringing this amazing printer to the community. Blurolls team collects all high quality components to Voron builders for high quality Voron printers. Hope everyone will give us feedback on the kit, so we will improve the quality. Thank you.
    Attention:
    the kit doesn't includes printed parts, you have to print them yourself, you can also buy them from this
    Click
    . We collect high quality components for you, so you don't need buy them from different stores.
    You will probably have to pay for tax, if you buy this kit.
    Note: Bigtree SKR 1.4 mainboard has run out. We will sell the kits with Spider or SKR Octopus mainboard in the end of May. If you order it, please extend the order time for order leading time. We can also provide the kits without mainboard, and please inform us to adjust the price for you. Thank you!
    The width of slots in frame kit is 6mm
    Package:
    22x M5*40 SHCS-Hex Drive
    22x M5*30 BHCS-Hex Drive
    27x M5*16 BHCS-Hex Drive
    40x M5*10 BHCS-Hex Drive
    4x M4*6 BHCS-HexDrive
    28x M3*40 SHCS-HexDrive
    29x M3*30 SHCS-HexDrive
    28x M3*20 SHCS-HexDrive
    14xM3*16 SHCS-HexDrive
    23xM3*12 SHCS-HexDrive
    217x M3*8 SHCS-HexDrive
    6x M3*6 BHCS-HexDrive
    15x M2*10mm Plastite Self Tapping Screw
    90x M3 Threaded insert
    42x 5*10*1 Shim Ring
    2x M3 Washer
    7x M3 Hexnut
    26x M5 Hexnut
    120x M3 T-nut HNTAJ5-3 2020
    61x M5 T-nut HNJ5-5T  2020
    47x M3 Hammer Head T-Nuts
    4x M4 Knueled Nut
    2x Gates GT2 Open Belt LL-2GT-6(6mm wide)(optional)
    4x Gates GT2 Open Belt LL-2GT-9(9mm wide)(optional)
    4x Gates GT2 Belt Loop(6mm wide)-188mm
    3x GT2 20T(6mm wide) Pulley(5mm bore)
    4x GT2 16T(6mm wide) Pulley(5mm bore)
    8x GT2 20T(9mm wide) Pulley(5mm bore)
    2x GT2 20T(6mm wide) Toothed idler(5mm bore)
    4x GT2 20T(9mm wide) Toothed Idler(5mm bore)
    4x GT2 80T(6mm wide) Pulley(5mm bore)
    20x F695 2RS Bearing
    12x 625 2RS Bearing
    4x 5*60mm Shaft-Grind Flat
    1x 5*30 Shaft
    8x Hiwin Linear Rail MGN9H 350/400mm(optional)
    4x Rubber Compressor Foot
    3x SPDT KW10 Limit Micro Switch with cable
    1x PL-08N Inductive Probe with BAT85 Diode
    1x Delixi DC-AC SSR (10A)
    1x LDO motors kit
    1x Means Well LRS-200-24 PSU
    1x Means Well RS-25-5 PSU
    1x IEC320 C14 Inlet-Push-fit-w/Rocker Switch&Fuse
    1x Power cord(UK/EU/AU/US)
    1x ADDA 40*40*10 Centrifugal Blower fan(24v)
    1x  40*40*20 Axial Fan(24v)
    3x Delta 60*60*20 Axial Fan(24V)
    1x Dragon Hotend(with cartridge and thermistor)
    1x Thermal Fuse
    2mmx Foam Panel Tape (5mm wide/1mm thick)
    1x 15*10mm cable chain 495MM/535MM (optional)
    2x 10*10mm cable chain 355MM/405MM(optional)
    1x Raspberry Pi 4
    1x Micro SD Card 32GB
    1x Micro USB Power cable
    2x Bigtree SKR 1.4 mainboard
    7x TMC2209 Stepper Motor Driver
    1x USB cable A-male B-male 2 Mini 12864 Display (Type B)
    4x Openbuilds Angle Corner Connector
    18x Misumi HFSB5-2020
    1xMagnetic flexible PEI sheet
    1x MIC-6 8mm aluminum plate
    1x Silicone heated bed with thermistor
    2x Coroplastic sheet--Bottom
    1x Coroplastic sheet--Back
    2x Acrylic sheet--Front
    2x Acrylic sheet--Side
    1x Acrylic sheet--Top
    1x Crimped Cables kit for full kit